Zenith XZM Series Ultrafine Mill is widely used in making fine powder or micro powder, a new kind of machine for producing ultrafine powder. It is mainly used for grinding the material with middle and low hardness, moisture below 6%, and the material should be non-explosive and non-flammable, such as: calcite, chalk, limestone, dolomite, kaolin, bentonite, steatite, mica, magnetite, iolite, pyrophillite, vermiculite, meerschaum, attapulgite, diatomite, barite, gypsum, alunite, graphite, fluorite, phosphate ore, potassium ore pumice, etc. The size of the finished product can be adjusted between 325-2500 mesh.



Working Principle Of The XZM Series Ultrafine Mill:

The main bearing and each dial are driven by electromotor of main machine through reducer, and numbers of roller，which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small sizes ones and they are sent to storage bin by elevator. The electromagnetic vibrating feeder will send them to the middle of first dial evenly. The materials will be driven to the edge of dial by centrifugal force, and fall down into the ring and crushed, and then grinded by roller. The materials will fall down into the second and third ring, crushed and grinded. The high pressure-centrifugal blower will inhale air from the outside and blow the materials, which are grinded in the third ring, to powder classifier. The rotating turbo in the powder concentrator will make the coarse materials return to the mill and reground， while the fineness will mix with the air and go into the cyclone and be discharged the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.

The Technical Data Of The Grinding Mill:

Tab 1:
item	XZM215	XZM221	XZM227
Number of roller(piece)	15	21	27
Ring diameter(mm)	Φ600	Φ800	Φ1000
Number of ring (piece)	3	3	3
main equipment rotate speed(r/min)	235	235	235
Max. feed size(mm)	≤10	≤10	≤10
Final size (mesh)	325－2500	325-2500	325-2500
Capacity(kg/h)	350-2500	600－4000	900－6000
Overall size(m)	10×2×5.5	12.4×2.5×6.3	18.2×4.7×8.6
Note: If there is any change of above specification, it is all according to the booklet with machine.

Tab2:
Basic data	Item	Unit	specification
			XZM215	XZM221	XZM227
Motor of main machine	Model	-	Y225S-4	Y250M-4	Y2-315-6
	Power	kw	37	55	110
Speed-adjustable motor	Model	-	Y160M-4	Y180M-4	Y2VP200L-4
	Power	kw	11	18.5	37
Motor of elevator	Model	-	Y100L-4	Y100L-4	Y100L-4
	Power	kw	3	3	3
Motor of blower	Model	-	Y200L1-2	Y225M-2	Y280M-2
	Power	kw	30	45	75
Hammer crusher	Model	-	250*400	250*400	250*400
	Power	kw	15	15	15
Electromagnetic Vibrating feeder	Model	-	GZ1F	GZ1F	GZIF
	Power	kw	0.06	0.06	0.06
Discharge valve	Model	-	ZJD-1：40	ZJD-1：40	ZJD-1：40
	Power	kw	0.75	0.75	0.75
Pulse deduster	Model	-	DMC72-II	DMC120-II	DMC184-II
	Power	kw	5.5	7.5	Y-160L-4-15
Note: If there is any change of above specification, it is all according to the booklet with machine.

Welcome to Shanghai Zenith Company.If you want to more information about our products, Please give us the message, we will reply as soon as possible.

Name:	*
Email:	*
Country:	*
Tel:
Company:
Inquiry:	* Can not contain links